The PM5 can drive 5 digital/PWM outputs reaching as high current as 5A per channel, switching in range of 0-5/0-24 volts at a maximum frequency of 10KHz.
The PM5 is compatible with a single motor output of the GT1 at input end, while the output connector is compatible with the old standard DB9 port, so old astronomical mountings or motors are suitable for use.
The PM5 also is well insulated, using an optocoupler as input stage, can be over/lower volted safely.
It has these features and connectors:
- RJ12 digital input connector, positive active
- Coaxial supply voltage, center positive
- DB9 output connector
- High current and voltage: up to 5A/24V impulsive per channel
- Optical input insulation
Read the PM5 Usage Guide for informations on the correct usage of the PM5 driver